USE SD CARD AS DEFAULT STORAGE IN CM 13 OR MARSHMALLOW BASE ROMS

HI GUYS,
HOW ARE YOU .....
MANY OF YOU REQUESTED ME TO SOLVE STORAGE PROBLEM IN ANY CM 13 OR ANY MARSHMALLOW BASE ROM.
               SO TODAY I SHOW YOU HOW YOU USE YOUR SD CARD AS DEFAULT STORAGE IN CM 13 ( LIKE MY LAST UPDATED ROM -RR M 5.6.7) ROMS...

MY HUMBLE REQUEST:

PLEASE DON'T MIRROR MY POST TO ANY WHERE ELSE WITHOUT MY PERMISSION. IF ANY ONE WANT TO MIRROR IT WITH MY PERMISSION, HE WILL HAVE TO GIVE PROPER CREDITS TO MY BLOG WITH THIS LINE ----- 

"THIS LINK WAS TAKEN FROM HTTP://WWW.UNITSOLUTION.BLOGSPOT.IN - PUBLISHED BY BISWAJIT SARDAR"

WARNING : BEFORE ANYTHING TO DO TAKE A FULL ROM BACKUP OF YOUR DEVICE,BECAUSE IF ANYTHING GOES WRONG YOU CAN RESTORE YOUR DEVICE IN WORKING POSITION,

"UNITSOLUTION" NOT TAKE ANY RESPONSIBILITY FOR YOUR LOS...  SO BE CAREFUL... 

 WHAT NEEDED : 

1) A WORKING DEVICE WITH CM 13 PRE-INSTALLED.

2) XPOSED FRAMEWORK ( HOW TO INSTALL I ALREADY POST .. CHECK IT)

3) XinternalSD XPOSED MODULE .


PROCEDURE:

1) OPEN XPOSED FRAMEWORK APP AND DOWNLOAD  XinternalSD MODULE.

2) OPEN XinternalSD APP FROM APP DRAWER AND SET IT LIKE MY PICTURE.



NOTE: WHERE I WRITE "STORAGE/90164EF8" YOU SHOULD BE WRITE YOUR SD CARD NAME WHICH YOU FIND IN FILE MANAGER  

3) AFTER DOING APP SETTING, ACTIVATE THE MODULE IN XPOSED APP MODULE SECTION.


4) AT LAST REBOOT YOUR DEVICE.....

THAT'S IT YOUR SD CARD NOW WORK AS DEFAULT STORAGE..


THANKS FOR READING MY POST......

RESURRECTION REMIX- M 5.6.7 FOR MICROMAX UNIT 2 ANDROID 6.0.1 ( STABLE)

HELLO FRIENDS , GOOD NEWS FOR ALL MY FRIENDS......AT LAST YOU CAN USE A MARSHMALLOW BASE BAGELS CM ROM, TODAY I PRESENT RESURRECTION REMIX- M 5.6.7 LATEST BUILD RESURRECTION REMIX- M 5.6.7 STABLE VERSION FOR MICROMAX UNIT 2...


MY HUMBLE REQUEST:

PLEASE DON'T MIRROR MY POST TO ANY WHERE ELSE WITHOUT MY PERMISSION. IF ANY ONE WANT TO MIRROR IT WITH MY PERMISSION, HE WILL HAVE TO GIVE PROPER CREDITS TO MY BLOG WITH THIS LINE ----- 

"THIS LINK WAS TAKEN FROM HTTP://WWW.UNITSOLUTION.BLOGSPOT.IN - PUBLISHED BY BISWAJIT SARDAR"


"ROM INFORMATION"

NAME: RESURRECTION REMIX- M 5.6.7

ANDROID VERSION: 6.0.1

ROM PORTER: BISWAJIT SARDAR (ME)

ROM DEVELOPER:  AJIT GURAYA

CHANGE LOG:
 BLUETOOTH AND STOCK CAMERA VIDEO RECORDING WORKING GREAT

BUGS: NOTHING FOUND BY ME



"WHATS WORKING"
1)   CALL
2)   BOTH STORAGE
3)   SMS
4)   GPS
5)   RIL
6)   CAMERA ( BOTH PHOTO AND VIDEO RECORDING WORKING)
7)   DUAL SIM
8)   HOTSPOT
9)   GAPPS
10)  SCREEN RECORDING
11)  USSD
12)  AUDIO
13)  WIFI
14)  DATA
15)  BLUETOOTH

AND MANY MORE......



"SCREENSHOTS"




WARNING: 

FLASHING A CUSTOM ROM MAY BRICK YOUR DEVICE, SO IT IS STRONGLY RECOMMENDED BEFORE FLASHING ANY CUSTOM ROM, DO A FULL ROM BACKUP.IF YOU WISH FLASH CUSTOM ROM WITHOUT ANY BACKUP, I AM NOT RESPONSIBLE FOR ANYTHING WRONG.SO BE CAREFUL.

CREDITS:

AJIT GURAYA FOR DEVELOPING ResurrectionRemix-M 5.6.7  FOR MTK6582.
AND THANKS TO: FERHUNG,FIRE 855,HYPERION70,DIPARTH SHAH,MINH QUOC,KARIM GAHGAH,ANIRUDHYA ADHIKARI,TEAM ROGER THAT,REQUIRED BLOBS.
THIS ROM WAS POWERD BY - MTKROMS.COM



WHAT DO YOU NEED TO HAVE:

1) ResurrectionRemix-M 5.6.7..ZIP ROM

2) GAPPS PACKAGE

3) And oviously a Rooted Micromax Unit 2 with a Custom recovery install.

HOW TO INSTALL :

FIRST OF ALL DOWNLOAD BOTH OF  ResurrectionRemix-M 5.6.7..ZIP AND PROPER GAPPS PACKAGE AND COPY IT TO YOUR SD CARD.

1)DO A FACTORY DATA RESET , THEN CLEAN CATCH AND DELVIC CATCH.

2) AFTER CLEANING CATCH, SELECT INSTALL ZIP FROM SD CARD THEN FIND AND FLASH ResurrectionRemix-M 5.6.7..ZIP AND PROPER GAPS PACKAGE

3) NOW AGAIN CLEAN ONLY DELVIC CATCH.AND REBOOT YOUR PHONE..

THAT'S  IT ENJOY  ...

...###.THIS ROM WAS STABLE VERSION, I DO NOT FOUND ANY BUGS IN THIS ROM.
BUT IF YOU GUYS FACING ANY TROUBLE WHILE FLAHSING OR USING THIS ROM OR MY OTHERS ROMS, FEEL FREE TO INFORM ME.....###



DOWNLOAD ResurrectionRemix-M 5.6.7  : CLICK HERE

DOWNLOAD GAPPS                                          : CLICK HERE (ARM>6.0>PICO)

FIX AUTO ROTATION BUG                              : CLICK HERE
(Thanks to: Just flash. Credits : Fire855, Tirth Patel, Morkva2102)

THANKS FOR READING MY POST.....

HOW TO ROOT CM 13 OR ANDROID 6.0 ROMS

HAY GUYS ,I NOTICE THAT MANY OF YOU HAD TROUBLE TO ROOT CM 13 ROMS.... SO  TODAY I SHOW YOU HOW TO ROOT CM 13 OR ANY MARSHMALLOW BASE ROMS ........

ROOT INTRODUCTION : 

ROOTING IS ANDROID JAIL BREAKING , MEANS AFTER ROOTING YOUR ANDROID PHONE YOU CAN INSTALL UNAPPROVED ( BY GOOGLE ) APPS BY GOOGLE , YOU CAN CHANGE YOUR FIRMWARE , CUSTOMIZE LIKE YOU WANT, OVERCLOCKING YOUR DEVICE PROCESSOR , AND SO ON...


MY HUMBLE REQUEST:

PLEASE DON'T MIRROR MY POST TO ANY WHERE ELSE WITHOUT MY PERMISSION. IF ANY ONE WANT TO MIRROR IT WITH MY PERMISSION, HE WILL HAVE TO GIVE PROPER CREDITS TO MY BLOG WITH THIS LINE ----- 

"THIS LINK WAS TAKEN FROM HTTP://WWW.UNITSOLUTION.BLOGSPOT.IN - PUBLISHED BY BISWAJIT SARDAR"




WARNING: 

ROOTING YOUR PHONE OR INSTALLING CUSTOM ROMS, YOU VOID YOUR DEVICE WARRANTY,AND ALSO  DOING THIS WITH WRONG PROCEDURE ALSO  YOU CAN BRICK YOUR DEVICE, SO BE CAREFUL AND TAKE FULL ROM BACKUP BEFORE DOING ANYTHING, I WILL NOT RESPONSIBLE IF U BRICK YOUR DEVICE WITHOUT TAKING ANY BACKUP....


ROOTING PROCEDURE FOR CM 13 :

1) FIRST OF ALL GO TO SETTINGS > ABOUT PHONE AND THEN TAP 3 TIMES IN BUILD       NUMBER....





2) THEN YOU NOTICE DEVLOPER MODE SHOULD BE VISBLE , CLICK ON THAT AND THEN IN ROOT ACCESS PANEL SELECT APPS AND ADB..

3) THAT'S IT CLOSE SETTINGS AND INSTALL LATEST SUPER SU APP FROM PLAY STORE,IT WILL TAKE SOME TIME FOR INSTALL LATEST BINARY ON YOUR DEVICE.

4) AFTER INSTALLING BINARY REBOOT YOUR DEVICE...CONGRATS YOUR DEVICE HAS BEEN ROOTED NOW..
          ENJOY.........
  
THANKS FOR READING MY POST.......... 

HOW TO INSTALL XPOSED FRAMEWORK ON MICROMAX UNITE 2 ANDROID 6.0

HELLO FRIENDS I NOTICED THAT MANY OF YOU GUYS TROUBLE TO INSTALL XPOSED FRAMEWORK ON MICROMAX UNIT 2 BECOUSE  THERE WAS MANY KIND OF XPOSED VERSION AVAILABLE IN INTERNET, SO YOU GUYS CONFUSED WHAT VERSION WORK ON OUR UNIT 2, SO  TODAY I SHOW YOU HOW TO INSTALL XPOSED FRAMEWORK ON MICROMAX UNIT 2 IN CM 13 OR ANDROID 6.0 ROMS...........

MY HUMBLE REQUEST:

PLEASE DON'T MIRROR MY POST TO ANY WHERE ELSE WITHOUT MY PERMISSION. IF ANY ONE WANT TO MIRROR IT WITH MY PERMISSION, HE WILL HAVE TO GIVE PROPER CREDITS TO MY BLOG WITH THIS LINE ----- 

"THIS LINK WAS TAKEN FROM HTTP://WWW.UNITSOLUTION.BLOGSPOT.IN - PUBLISHED BY BISWAJIT SARDAR"


WARNING: FLASHING A WRONG XPOSED FRAMEWORK MAY BRICK YOUR DEVICE, SO IT IS STRONGLY RECOMMENDED BEFORE FLASHING XPOSED DO A FULL ROM BACKUP.IF YOU WISH FLASH XPOSED WITHOUT ANY BACKUP, I AM NOT RESPONSIBLE FOR ANYTHING WRONG.SO BE CAREFUL.



WHAT IS XPOSED FRAMEWORK : THE XPOSED FRAMEWORK IS A WAY TO MAKE CHANGES YOUR ANDROID SYSTEM LEVEL WITHOUT INSTALLING A CUSTOM ROM WITH THE HELP OF XPOSED MODULES.



WHAT DO YOU NEED TO HAVE:

1) XposedInstaller_3.0_alpha4.apk

2) Xposed-v80-sdk23-arm.zip

3) And oviously a Micromax Unit 2 with a Custom recovery install.

HOW TO INSTALL :

FIRST OF ALL DOWNLOAD BOTH OF APK AND ZIP FILE AND COPY IT TO YOUR SD CARD.

1)  INSTALL XposedInstaller_3.0_alpha4.apk.

2)THEN RESTART YOUR UNIT 2 IN RECOVERY MOD.

3) AND THEN FROM THERE SELECT INSTALL ZIP FROM SD CARD AND FLASH Xposed-v80-sdk23-arm.zip.

4) NOW REBOOT YOUR PHONE.

THAT'S  IT OPEN YOUR XPOSED AND START INSTALLING DIFFARENT MODULES FOR YOUR NEED.... ENJOY




DOWNLOAD XposedInstaller_3.0_alpha4.apk  : CLICK HERE

DOWNLOAD Xposed-v80-sdk23-arm.zip            : CLICK HERE


THANKS FOR READING MY POST.....

  

CM 13 V3 ( STABLE ) FOR MICROMAX UNIT 2 ANDROID 6.0.1 BLUETOOTH WORKING

HELLO FRIENDS , GOOD NEWS FOR ALL CM 13 FANS......AS I PROMISED, TODAY I PRESENT CM 13 LATEST BUILD CM13 V3 STABLE VERSION FOR MICROMAX UNIT 2...


MY HUMBLE REQUEST:

PLEASE DON'T MIRROR MY POST TO ANY WHERE ELSE WITHOUT MY PERMISSION. IF ANY ONE WANT TO MIRROR IT WITH MY PERMISSION, HE WILL HAVE TO GIVE PROPER CREDITS TO MY BLOG WITH THIS LINE ----- 

"THIS LINK WAS TAKEN FROM HTTP://WWW.UNITSOLUTION.BLOGSPOT.IN - PUBLISHED BY BISWAJIT SARDAR"


"ROM INFORMATION"

NAME: CM 13 V3 ( STABLE )

ANDROID VERSION: 6.0.1

CM VERSION: 13

ROM PORTER: BISWAJIT SARDAR (ME)

ROM DEVELOPER:  AJIT GURAYA

CHANGE LOG: BLUETOOTH WORKING

BUGS: VIDEO RECORDING NOT WORKING IN STOCK CAM ( USE CAMU APP -WHICH ALLREADY ADDED TO THIS ROM)



"WHATS WORKING"
1)   CALL
2)   BOTH STORAGE
3)   SMS
4)   GPS
5)   RIL
6)   CAMERA ( USE CAMU APP FOR VIDEO RECORDING)
7)   DUAL SIM
8)   HOTSPOT
9)   GAPPS
10)  SCREEN RECORDING
11)  USSD
12)  AUDIO
13)  WIFI
14)  DATA
15)  BLUETOOTH



"SCREENSHOTS"





WARNING: FLASHING A CUSTOM ROM MAY BRICK YOUR DEVICE, SO IT IS STRONGLY RECOMMENDED BEFORE FLASHING ANY CUSTOM ROM, DO A FULL ROM BACKUP.IF YOU WISH FLASH CUSTOM ROM WITHOUT ANY BACKUP, I AM NOT RESPONSIBLE FOR ANYTHING WRONG.SO BE CAREFUL.

CREDITS:

AJIT GURAYA FOR DEVELOPING CM 13 FOR MTK6582.
AND THANKS TO: FERHUNG,FIRE 855,HYPERION70,DIPARTH SHAH,MINH QUOC,KARIM GAHGAH,ANIRUDHYA ADHIKARI,TEAM ROGER THAT,REQUIRED BLOBS.
THIS ROM WAS POWERD BY - MTKROMS.COM



WHAT DO YOU NEED TO HAVE:

1) CM13 V3 STABLE.ZIP ROM

2) GAPPS PACKAGE

3) And oviously a Rooted Micromax Unit 2 with a Custom recovery install.

HOW TO INSTALL :

FIRST OF ALL DOWNLOAD BOTH OF  CM13 V3 STABLE.ZIP AND PROPER GAPPS PACKAGE AND COPY IT TO YOUR SD CARD.

1)DO A FACTORY DATA RESET , THEN CLEAN CATCH AND DELVIC CATCH.

2) AFTER CLEANING CATCH, SELECT INSTALL ZIP FROM SD CARD THEN FIND AND FLASH CM13 V3 STABLE.ZIP AND PROPER GAPS PACKAGE

3) NOW AGAIN CLEAN ONLY DELVIC CATCH.AND REBOOT YOUR PHONE..

THAT'S  IT ENJOY  ...

...###.THIS ROM WAS STABLE VERSION, STILL SOME BUGS IN THIS ROM NEED TO BE FIX BUT IF YOU GUYS FACING ANY TROUBLE WHILE FLAHSING OR USING THIS ROM OR MY OTHERS ROMS, FEEL FREE TO INFORM ME.....###



DOWNLOAD CM 13 V3 STABLE   : CLICK HERE

DOWNLOAD GAPPS             : CLICK HERE (ARM>6.0>NANO)

THANKS FOR READING MY POST.....

ADPT OS V2 FOR MICROMAX UNIT 2 ( STABLE)

HELLO FRIENDS,
TODAY I PRESENT ADPT OS V2 ROM FOR MICROMAX UNIT 2 USERS DEVELOPED BY MAXIMUM ROM.....

"ROM INFORMATION"

NAME: ADPT OS V2

ANDROID VERSION: 5.1.1

CM VERSION: 12.1

ROM PORTER: BISWAJIT SARDAR (ME)

ROM DEVELOPER:  MAXIMUM ROM

BUGS: NOT AT ALL



"ROM FEATURES"

Pie Control (Non-apk)
Font Chooser (Non-apk)
Battery bar
Navbar Enabler (with Height)
Spilit Clock Style Chooser
Weather text along icon on statusbar
Notification Drawer & Lockscreen background chooser option along with transparency seek bar Screen Recorder (Non-apk)
All CM12.1 Apps
Back to LP Easter Egg
Carrier Label (NON-ApK)
Contextual Statusbar Header Background
Keyboard Updated
HeadsUP settings
AOKP System Anim
Power Animation
scrolling cache and list view tester
OTA Updater (Get weekly small bug fixes)
awesome boot animation
ADPT wallpapers
And many more

"SCREENSHOTS"





WARNING: FLASHING A CUSTOM ROM MAY BRICK YOUR DEVICE, SO IT IS STRONGLY RECOMMENDED BEFORE FLASHING ANY CUSTOM ROM, DO A FULL ROM BACKUP.IF YOU WISH FLASH CUSTOM ROM WITHOUT ANY BACKUP, I AM NOT RESPONSIBLE FOR ANYTHING WRONG.SO BE CAREFUL.

CREDITS:
ADPT for This Awesome ROM/ Maximum Dev / Port Team/ Unknown Porting Team/imalif/mickeycute/kenzukie/itsraj011
/Darkstar085/Pac man ROM/Team Bliss/Rahul Sehgal/Team CyanogenMod/westcrip/Omni ROM/Fire855/Anirudnha/Al3XKOoL/tuxboy/AOKP Rom/MOKKE ROM/ANSP ROM/Esa Yayan/Maadr/restu52/Venkat Kamesh/Apktool/gurpreetsingh/ticklefish  


WHAT DO YOU NEED TO HAVE:

1) ADPT OS V2.ZIP ROM

2) GAPPS PACKAGE

3) And oviously a Rooted Micromax Unit 2 with a Custom recovery install.

HOW TO INSTALL :

FIRST OF ALL DOWNLOAD BOTH OF  ADPT OS V2.ZIP AND PROPER GAPPS PACKAGE AND COPY IT TO YOUR SD CARD.

1)DO A FACTORY DATA RESET , THEN CLEAN CATCH AND DELVIC CATCH.

2) AFTER CLEANING CATCH, SELECT INSTALL ZIP FROM SD CARD THEN FIND AND FLASH ADPT OS V2.ZIP AND PROPER GAPS PACKAGE

3) NOW AGAIN CLEAN ONLY DELVIC CATCH.AND REBOOT YOUR PHONE..

THAT'S  IT ENJOY A BUGLES CM 12.1 ADPT OS V2 ROM ...

...###.ANY WAY THIS ROM HAS NOTHING TO BE FIX BUT IF YOU GUYS FACING ANY TROUBLE WHILE FLAHSING OR USING THIS ROM OR MY OTHERS ROMS, FEEL FREE TO INFORM ME.....###



DOWNLOAD ADPT OS V2  : CLICK HERE

DOWNLOAD GAPPS       : CLICK HERE (ARM>5.1>NANO)


THANKS FOR READING MY POST.....

  

Como flashear con eMMC DL TOOL telefonos con chip Qualcomm

ANTES DE FLASHEAR


No me hago responsable por cualquier daño o perdida que le hagas a tu dispositivo, RESPALDA LA INFORMACION que tengas en el dispositivo, usalo bajo tu propia responsabilidad


Esta guia es solo para telefonos con SoC(System On Chip) Qualcomm

ATENCION!
No estoy seguro si funciona con todos los telefonos con chip Qualcomm

QUIZAS SE BORRE EL IMEI
Tambien existe la posibilidad de que despues de flashear, el telefono se queda sin IMEI, hasta los momentos no he encontrado una manera facil y gratuita de restablecer el IMEI



ATENCION!!!

POR FAVOR SOLO FLASHEA LA ROM QUE ES PARA EL MODELO EXACTO DE TU TELEFONO, SI FLASHEAS OTRA ROM QUE NO ES PARA TU TELEFONO, PODRIAS DEJARLO COMO UN LADRILLO, ASI QUE MUCHO CUIDADO

Requisitos

• Telefono debe tener mas de 50% de carga en la bateria
• Stock rom del telefono (ASEGURATE que es para tu modelo exacto)
• Descargar y extraer eMMC DL TOOL 
• Descargar e instalar este driver (doble click en 00_install.bat, si te pregunta dile que si a todo)
• Cable USB del telefono
• Computador con Windows

Pasos para flashear

• Apaga el telefono
• Ejecuta eMMC DL TOOL 
• Abajo en FW Path click en el boton ... y busca la carpeta del rom del telefono
• Con el telefono apagado, presiona al mismo tiempo las teclas de Volumen (Volumen+ y Volumen-) (ATENCION! En caso de que no lo reconozca Windows intenta presionando tambien la tecla Power y/o tambien intenta sin la bateria, si es extraible) y conecta el telefono al computador, alli deberias de escuchar el sonido de conexion USB de Windows
• Dirigete al Administrador de dispositivos, click derecho Mi PC -> Propiedades -> en la parte izquierda click en: Administrador de dispositivos 
• Expande: Puertos (COM y LPT) y deberia de aparecerte algo como: Qualcomm HS-USB Diagnostics 9006 (COMxx) (donde xx es un numero) memorizalo porque lo necesitaras para el proximo paso
• En eMMC DL TOOL, en Disk1 al lado coloca el numero de puerto COM memorizado en el paso anterior
• Click en el boton: DL1, para empezar a flashear, no hagas nadas mientras flashea
• Si todo salio bien deberia decirte Pass en verde
• Listo!

Publicado en tttony.blogspot.com